Jan 28 - Jan 29, 2022
09-06 GMT

International Webinar on Civil Engineering and Architectural Design

Anshuman Srivastava

Head and Dean (R and D)

Organsing Committee Member

SIET Allahabad

Publications

1.AnshumanSrivastava, PralayMaiti, Devendra Kumar, Om Parkash.“Mechanical and dielectric properties of CaCu3Ti4O12 and La doped CaCu3Ti4O12poly(vinylidene fluoride) composites”. Composites Science and Technology 93 (2014) 83–89. Impact factor: 3.628.

2. Karun Kumar Jana, AnshumanSrivastava, Om Parkash, Devesh K. Avasthi,DipakRana, Vinod K. Shahi, PralayMaiti, “Nanoclay and swift heavy ions induced piezoelectric and conductingnanochannel based polymeric membrane for fuel cell” Journal of Power Sources 301 (2016) 338-347. Impact factor 6.1

3. Anshuman Srivastava, Karun Kumar Jana, Pralay Maiti, Devendra Kumar andOmParkash.Poly(vinylidene fluoride)/ CaCu3Ti4O12 and La doped CaCu3Ti4O12 composites with improved dielectric and mechanical properties”. Material Research Bulletin.70 (2015) 735-742, Impact factor: 1.968.

4. AnshumanSrivastava, PralayMaiti, Devendra Kumar, Om Parkash. “Structural and dielectric properties of Niobium doped CaCu3Ti4O12.An Internationaljournal of Manufacturing Technology and Research.ISSN No.:0973-0281,Vol 9 No1.

5.  Vinay Mishra, AnshumanSrivastava. Epoxy/Wood Apple Shell Particulate CompositeWith Improved Mechanical Properties.International Journal of Engineering Researchand Applications.ISSN : 2248-9622, Vol. 4, Issue 8( Version 1), August 2014, pp.142-145.

6. Anshuman Srivastava, Karun Kumar Jana, Pralay Maiti, Devendra Kumar andOmParkash.Mechanical and   Dielectric Behaviour of CaCu3Ti4O12 and NbDoped CaCu3Ti4O12 Poly(vinylidene fluoride) Composites”.Journal of Composites.Volume 2014, Article ID 769379, 9 pages.

7.Anshuman Srivastava, Karun Kumar Jana, Pralay Maiti, Devendra Kumar andOmParkash.“Investigations on Structural, Mechanical, and Dielectric Properties of PVDF/Ceramic Composites”.Journal of Engineering.Volume 2015, Article ID205490, 9 pages.

8.AnshumanSrivastava, Madhusoodan Maurya. Preparation and MechanicalCharacterization of Epoxy based composites developed by Bio waste. International Journal of Research in Engineering and Technology.IJRET: International Journal of Research in Engineering and Technology.ISSN: 2319-1163, Volume-04 Issue-04.

9. AnshumanSrivastava. Recent Advances in Metal Matrix Composites (MMCs): A Review.
Biomed J Sci& Tech Res 1(2)-2017.

10. AnshumanSrivastava, Om Parkash, Devendra Kumarand PralayMaiti.Synthesis and Characterization of High Dielectric Constant Material CaCu3Ti4O12.Biomed Sci&Tech.
Res 1(4)- 2017. BJSTR.MS.ID.000363. DOI: 10.26717/BJSTR.2017.01.000363

11. Vinay Mishra, AnshumanSrivastava. Flame Retardancy and TribologicalBhaviour of Natural FberRinforcedCmposites: ARview. Organic & Medicinal Chem IJ. 2017; 4(1): 555628. DOI: 10.19080/OMCIJ.2017.04.555628.

12. Kumar Asheesh, SrivastavaAnshuman (2017) Preparation and Mechanical Propertiesof Jute Fiber Reinforced Epoxy Composites. Industrial Engineering & Management 6: 234.doi:10.4172/2169-0316.1000234.

13. AnshumanSrivastava, Om Parkash, Devendra Kumar, PralayMaiti. Structural and Dielectric Properties of Lanthanum Doped CaCu3Ti4O12for Capacitor Application. American Journal of Materials Synthesis and Processing. Vol. 2, No. 6, 2017, pp. 90-93.
doi: 10.11648/j.ajmsp.20170206.13

14. Rajendra Kumar Kushwaha, AnshumanSrivastava. Recent Developments in Bio-nanocomposites: A Review. Research Journal of Nanoscience and Engineering Volume 2, Issue 2, 2018, PP 1-4.

15. Shalini S, Anshuman S. A Review on Different Configuration of Electrochemical Discharge Micro-machining Process. Res Dev Material Sci .7(4). RDMS.00069.2018. ISSN: 2576-8840 DOI: 10.31031/RDMS.2018.07.000669.

16.ShaliniSahu and AnshumanSrivastava, paper title “Preparation and Mechanical Characterization of Sisal fibre reinforced Epoxy Composites” published in Asian Chitin Journal, vol,14 No 2, Dec18 in National Conference on Polymers: Usefulness & Current Concerns and 11th Award Function of Professor SukumarMaiti Polymer Award Foundation, December 23, 2018. Organized by Department of Chemistry, Motilal Nehru National Institute of Technology Allahabad, Prayagraj.

17.ShaliniSahu and AnshumanSrivastava, “Synthesis and Mechanical Properties of Short Sisal Fibre Dispersed Epoxy Composites”. Research Journal of Nanoscience and Engineering Volume 3, Issue 1, 2019, PP 10-12.

18. AnshumanSrivastava “Study on tri-bology of natural fiber reinforced polymercomposites: A review” SVOA Materials Sci-ence and Technology 1:1 (2019) 4-10.

Book Chapter

 A book chapter title. “A facile soft chemistry route for the synthesis of Bi2/3Cu3Ti3.90Fe0.10O12 nanomaterial as perovskite-structured active solid heterogeneous nanocatalyst in biodiesel production: A future perspective" is submitted for the book on 'Advanced Nanocatalysts for Biodiesel Production'  to be published by CRC Press.

 

List of Research Papers presented in National and International conferences and Symposiums

1.K.M. Gupta and AnshumanSrivastava.
Development and Characterization of Natural Jute-cane Dual Green Fibre Hybrid Composite” published in the proceedings of the ‘11th International Conference on frontiers of Polymers and Advanced Materials (Incorporating Biomaterials Africa), University of Pretoria, Hatfield, Pretoria, May 22-27, 2011.

2.AnshumanSrivastava, Om Parkash, Devendra Kumar and PralayMaiti
“Synthesis and characterization of high dielectric constant material CaCu3Ti4O12” Published in the proceeding of “National Conference on Futuristics in Mechanical Engineering” FME-2014 held on 08-09 March, 2014 at Madan Mohan Malviya University of Technology, Gorakhpur (Uttar Pradesh).

3.AnshumanSrivastava, Om Parkash, Devendra Kumar and Pralaymaiti
 “Dielectric properties of Poly(vinylidene fluoride)/CaCu3Ti4O12 composites” Presented in“APA International conference on polymers : Vision and innovations” APA-2014 held on 19-21 Feb, 2014 at Indian Habitat Centre, New Delhi.Organized by IIT Delhi and Asian Polymer Association.

4.AnshumanSrivastava, Om Parkash, Devendra Kumar and Pralaymaiti
“Structural and dielectric properties of Lanthanum doped CaCu3Ti4O12” Proceeding of “National Conference on Emerging Frontiers in Mechanical Engineering” EFIME-2014 held on 15-16 February, 2014 at Harcourt Butler Technological Institute, Kanpur (Uttar Pradesh).

5.AnshumanSrivastava, Om Parkash, Devendra Kumar and Pralaymaiti
“Dielectric properties of CaCu3Ti4O12 and Sn doped CaCu3Ti4O12” presented in“International Conference on Multifunctional Materials Energy and Environment” ICMFMEE-2013 held on 21-23 August, 2013 at Sharda University, Greater Noida (Uttar Pradesh) In collaboration with Federal Polytechnic, OKO, Nigeria.

6.AnshumanSrivastava, Om Parkash, Devendra Kumar and PralayMaiti.
"Structural and dielectric properties of PVDF and CaCu3Ti4O12 Poly(vinylidene fluoride) composites"Presented in“International Workshop on Surface Science and Engineering” SSEW-2013 held on 4-5 March, 2013 at I.I.T.-Indore, Indore (Madhya Pradesh).

7.AnshumanSrivastava, Devendra Kumar, PralayMaiti and Om Parkash.
 “Structural and dielectric properties of Niobium doped CaCu3Ti4O12” Presented in“National Conference on Achieving Excellence for Industrial Competitiveness” AEIC-2013 held on 19-20 January, 2013 at Department of Mechanical Engg., GLA University, Mathura (Uttar Pradesh).

8.Shreevats, AnshumanSrivastava, Pallav Gupta, Devendra Kumar, Om Parkash, A. K. Jha and PralayMaiti“Advanced Ceramics: Novel Materials for Wide Engineering Applications” presented in “ INDO-UK International Workshop on Advanced Materials and their Applications in Nanotechnology” (AMAN-2014) held on 17-19 May, 2014 at BITS Pilani, Goa Campus in collaboration with University of Leeds, UK.

9.Vinay Mishra and AnshumanSrivastavaGreen Composites” presented in National Conference on “Challenges & Opportunities for Technological Innovation in India” (COTII -2014), 22nd February, 2014organized byAmbalika Institute Of Management & Technology, Lucknow.

10.AnshumanSrivastava, PralayMaiti, Devendra Kumar and Om Parkash. Paper presented on
 “Effect of ceramic dispersion on the structural, mechanical and dielectric properties of Poly(vinylidene fluoride) matrix composites”, in “International Symposium on Advances in Materials Characterization” (ISAMC-2014)  held on 14 July, 2014 at  BabasahebBhimraoAmbedkar University, Lucknow (Uttar Pradesh).

11.AnshumanSrivastava, PralayMaiti, Devendra Kumar and Om Parkash. Paper presented on “Polymer Ceramic Composites of 0-3 Connectivity for Embedded Capacitors Applications” in National Symposium on Nanomaterials& sustainable Synthetic Strategies,21-22 March 2015 organized by Department of Chemistry, Faculty of Science, Banaras Hindu University, Varanasi, INDIA.

12. Presented a paper entitled “Metal/Polymer Matrix Composites: Advanced Materials for Wide Engineering Applications”, on Institute Day in the Department of Ceramic Engineering, Indian Institute of Technology, BHU, Varanasi.

13.AnshumanSrivastava and ParasGautam. Paper presented on “Preparation and Mechanical Characterization of Coconut Shell Powder Dispersed Epoxy Composites” in National Conferences on Advances in Mechanical Engineering, 01-02 May 2015 organized by Mechanical Engineering Department,  VASAVI COLLEGE OF ENGINEERING, Hyderabad, INDIA.

14.Vinay Mishra, PriytamSrivastava and AnshumanSrivastava, paper title “Passive Energy” In International Conference on Challenges and Opportunities for Technological Innovations in India (COTII 2017) held on 3-4 Marchin AIMT Lucknow.

15. ShaliniSahu and AnshumanSrivastava, paper title “Preparation and Mechanical Characterization of Sisal fibre reinforced Epoxy Composites” published inproceeding ofNational Conference on Polymers: Usefulness & Current Concerns and 11th Award Function of Professor SukumarMaiti Polymer Award Foundation, December 23, 2018. Organized by Department of Chemistry, Motilal Nehru National Institute of Technology Allahabad, Prayagraj.

16.MohdTaufik, MohdSufiyanJafri, Vikas Gupta and AnshumanSrivastava,  paper title “Futuristic trends in the field of Carbon nanotubes (CNTs)” was presented in national conference on “Industrial Application of Nanoscience and Nanotechnology 2019” which was held during November 15 - 16, 2019 at Motilal Nehru National Institute of Technology Allahabad, Prayagraj, Uttar Pradesh, India.

17.ShubhamMalviya, PrashantAgrahari and AnshumanSrivastava,  paper title “A Review on Nanofluids: Fabrication, properties and future applications” was presented in national conference on “Industrial Application of Nanoscience and Nanotechnology 2019” which was held during November 15 - 16, 2019 at Motilal Nehru National Institute of Technology Allahabad, Prayagraj, Uttar Pradesh, India.

18.ZeeshanNusrat and AnshumanSrivastava, paper title “Banana fiber reinforced epoxy composite a good solution for various Technological applications”, International Conference on Energyand Environmental TechnologiesCHEM-CONFLUX20MNNIT, Allahabad during February 14-16, 2020.

19. Attended a one week workshop on “ Advances in Manufacturing Processes” from 13/07/20- 17/07/20, organised by Department of Mechanical Engineering, BIET Hyderabad.

20. Participated in International conference on “Advance Mechanical Behaviour & Characterization” during 18-23 July, 2020, organised by Mattest Research Academy, Chennai.

21. Attended a Webinar on “Agile Software development” on 18-07-2020, organised by K.L.E Society, Hubballi.

22. Participated in 3- days National Webinar on “Secondary Melting and Processing Tec”nologies" organised by MGIT, Hyderabad.

23. Abha, AnshumanSrivastava,NidhiAsthana and KamleshPandey, Paper presented on “Mechanical and physical Characterization of PVA/ Wheat husk Nanocomposites” in International conference on recent advances in science and engineering organised by Rajkiya Engineering College, Sonbhadra, from 27-27 Feb, 2021.

24. Attended a FDP on Waste heat recovery and utilization organised by Mechanical Engineering Department, I.I.T. (B.H.U) Varanasi, during 17-23, January 2021.

25. Sanjay Kumar Patel and Dr.AnshumanSrivastava “Preperation and Mechanical Properties of Epoxy/Sisal Fiber Composites”; International Conference (ITEM-20); B.N. College of Engineering & Technology, Lucknow on  27-28 August 2020.

26. Sanjay Kumar Pateland Dr.AnshumanSrivastava “Investigation on Mechanical Properties of SunhempFiber Reinforced Epoxy Composite”;International Conference on “Challenges & opportunity for Technological Innovation in India (COTII-2020), Ambalika Institute of Management &Technology, Lucknowon 28th& 29th  February,2020. 

27. Sanjay Kumar Pateland Dr.AnshumanSrivastava “ Materiais Behaviour & Characterization” International Conference on Advance Advance Materials Behaviour &Characterizaion organized by Mattest Research Academy, Chennai during 18-23 July 2020

28. Sanjay Kumar Pateland Dr.AnshumanSrivastava “Synthesis and Characterization of SunhempFiber Reinforced Polymer Composites” International Conference on Recent Advances in Science and Engineering (RASE 2021), Rajkiya Engineering College Sonbhadra, India During Feb 26-27 February 2021 and Presented a Paper.

Educations

Ph.D:

Indian Institute of Technology (BHU) Varanasi, India.

Thesis on Energy storage devices, Topic: Mechanical and Dielectric Characterization of PVDF/CCTO and Doped CCTO Composites for embedded Capacitor application.

M. Tech:

Material Science and Engineering. Motilal Nehru National Institute of Technology, Allahabad, India.

Thesis on Polymer matrix composites, Topic:Mechanical Characterization of Jute and Cane Fibres Reinforced Epoxy Hybrid Composites.

B. Tech:

Mechanical Engineering

Azad Institute of Engineering & Technology, Lucknow.

Dr R M  LAvadh University, Faizabad.

PROJECT: Fabrication and Analysis of Performance of Solar Cooker. Working model.

Collaborations

  • Delivered a Keynote lecture in International conference on “Use of clean energies in waste treatment” organised by Al-Nahrain University, Iraq from 12-13/July/2021
  • Designed, developed and conducted a training program on “Composites: Scope and possibilities for advance technological applications”for R and D peoples and Industry persons from Jun 6-9, 2021, in collaboration with CECA Gujarat, India.
  • Delivered a Keynote lecture in an International Conference on Sustainable Innovation in Mechanical Engineering (ICSIME-2021) on Role of composites in sustainable development held from 28-29 May 2021, organised by Faculty of Engineering & Technology, Rama University Uttar Pradesh, Kanpur, India.
  • Delivered an invited talk in International Symposium on Automation, Mechanical and Design Engineeringorganized by the Hong Kong Society of Robotics and Automation (HKSRA) on“Experimental investigations on mechanical and dielectric properties of ceramic dispersed PVDF composites”held in Beijing, China from Dec 24-26, 2020.
  • Delivered an invited talk on “Advances and latest trends in the field of Polymer matrix composites” in FDP, during 20-25 July, 2020 organised by SVNIET Barabanki.
  • Delivered an expert talk in a Web Symposium organised by Composite Excellence Centre of Asiaon “Physical and Mechanical Characterization of Polymer Ceramic Thin Film Composites” date 09/10/2020.
  • Delivered an Expert lecture on “Composites: An advance material for Engineering Applications” in TEQIP - III Sponsored One Week Short Term Course on COMPOSITE MATERIALS: OVERVIEW, CHARACTERIZATION AND APPLICATIONS (CMOCA-2018) held from July 16 to 20, 2018 in MNNIT Allahabad.
  • Delivered anInvited lecture on “Effect of Ceramic Dispersion on Physical, Mechanical and Electrical Properties of Polymer Matrix composites” in National Conference on Polymers: Usefulness & Current Concerns and 11th Award Function of Professor SukumarMaiti Polymer Award Foundation, December 23, 2018. Organized by Department of Chemistry, Motilal Nehru National Institute of Technology Allahabad, Prayagraj.
  • Invited for lecture on Advance Manufacturing Technique in FACULTY DEVELOPMENT PROGRAMME on Manufacturing Science and Technology, 14th to 18th JANUARY, 2016 Organized By: Department Of Mechanical Engineering, Azad Technical Campus, Dr.A.P.J.AbdulKalam Technical University, Lucknow -226002.

FDP/Workshop/Conferences organised:

  • Convener of FDP: Organised Faculty Development Programme on Manufacturing science and Technology, under TEQIP-III sponsored by AKTU Lucknow form 03 – 07 Dec, 2018.
  • Organised a workshop on Virtual Labs in SIET Prayagraj jointly with IIT Kanpur on 02/03/2019.
  • Worked as a member in organizing a workshop on Bio Technology in 2006 in MNNIT Allahabad.
  • Worked as a member in organising a National Conference Challenges and Opportunities for Technological Innovations in India (COTII 2016) in AIMT Lucknow.
  • Worked as a member in organising several institute level events in IIT BHU Varanasi, India.
  • Participated in FDPon Entrepreneurship: under TEQIP-III sponsored by AKTU Lucknow form 01 – 05 June, 2019.
  • Workshops and Symposiums attended

  • Attended National Workshop on Advanced Functional Materials and Structures organised by Department of Applied Mechanics, MNNIT Allahabad, India In collaboration with University of Missouri, Columbia, USA
  • Attended a “National Workshop onRecent advances in Materials Science”, organized by Dept. of Physics, University of Lucknow, Lucknow from 15-16 March 2013.
  • Attended a “National Symposium on Miniature Manufacturing in 21st Century”, Jointly organized by Dept. of Mechanical Engg., I.I.T.(B.H.U.) and BARC, Mumbai, from 16-18 August 2013.
  • Attended a “Workshop on Total Quality Management”, organized by Dept. of Mechanical Engg., I.I.T.(B.H.U.), Varanasi from 12-14 January 2014.
  • Participated in“8th All India Students' Conference on Science and Spiritual Quest”, organized by I.I.T.(B.H.U.), Varanasi from 01-02 February 2014.
  • Attended a “National Symposium on Organic Synthesis and Advanced Materials”, organized by Dept. of Chemistry, B.H.U., Varanasi from 01-02 March 2014.
  • Participated in “Workshop on Research Methodology for Future Researchers”, Organized by Mechanical Engineering Department, IIT BHU, Varanasi
  • Participated in National Workshop on “National Workshop on Advanced Ceramics in the field ofNanotechnology for Electro Ceramics”from 27-28 March, 2015, Organized by Department of Ceramic Engineering, Indian Institute of Technology, BHU, Varanasi.
  • Worked as a volunteer in organizing anInstitute Day in the Department of Ceramic Engineering, Indian Institute of Technology, BHU, Varanasi.
  • Attended a workshop on Virtual Labs in IIT Kanpur on 10-09-18.

Editorship

Editor, SVOA Material Science and Technology, London UK

Editor, International Journal of Research in Mechanical Engineering and Technology (IJRMET)

Editorial Board member,Organic and Medicinal Chemistry International Journal (OMCIJ)

Editorial Board member,International Journal of Industrial Engineering and Management