Jan 28 - Jan 29, 2022
09-06 GMT

International Webinar on Civil Engineering and Architectural Design

Ahmed Senouci

Associate Professor

Organsing Committee Member

University of Houston

Publications

Refereed Journal Papers
1. Mohsen, M., Al-Ansari, M., Taha, R., Senouci, A., AbuTaqa, A. (2020). “Impact of CNTs’ treatment, length and weight fraction on ordinary concrete mechanical properties”, Construction and Building Materials, Vol. 264, 120698.
2. Zakikhani; K., Zayed, T., Abdrabou, B., Senouci, A. (2020). “Modeling failure of oil pipelines”, Journal of Performance of Constructed Facilities, ASCE, Vol. 3, No. 1.
3. Mohsen, M., Al-Ansari, M., Taha, R., Senouci, A., AbuTaqa, A. (2020). “Optimum Dispersion Parameters of Carbon Nanotubes: Concrete Strength by Response Surface Methodologies”, Qatar University Press, 2020.
4. Senouci, A., Warith, K. A., Eldin, N. N. (2019). “Resource-Constrained Construction Scheduling Using Agent Based Modeling Technique”, Journal of Civil Engineering and Construction, Vol. 8, No. 1, pp. 25-33.
5. El-Abbasy, M. S., Zayed, T., El Chanati, H., Mosleh, F., Senouci, A., Al-Derham, H. (2019). “Simulation-based deterioration patterns of water pipelines”, Structure and Infrastructure Engineering, Vol. 15, No. 7, pp. 965-982.
6. Alsharqawi, M., Zayed, T., Parvizsedghy, L., Senouci, A., Al-Derham, H. (2019). “Reliability Assessment Model for Water Distribution Networks”, Journal of Pipeline Systems Engineering and Practice, Vol. 11, No. 2.
7. Al-Ansari, M., Abu Taqa, A. G., Senouci, A., Hassan, M. M., Shaat, A. (2019). “Effect of calcium nitrate healing microcapsules on concrete strength and air permeability”, Magazine of Concrete Research, Vol. 7, No. 4, pp. 195-206.
8. Senouci, A., Leon, R.M., Eldin, N. (2019). “Schedule Performance Index Effectiveness in Assessing Project Schedule Performance”, International Journal of Construction Engineering and Management, Vol. 8, No. 20, pp. 46-55.
9. Ala Abutaqa, A., Al-Ansari, M., Senouci, A., Hassan, M., Shaat, A., Akilla, M. (2018). “Characterization of self-healing efficiency of calcium nitrate microcapsules for concrete applications”, International Journal of Microstructure and Materials Properties, Vol. 14, No. 3, DOI: 10.1504/IJMMP.2019.10021509.
10. Jamil Fazilov, J., Senouci, A., Al-Derham, H. (2018). “Using Behavioral Based Safety to Enhance Safety Performance”, Journal of Civil Engineering and Construction, Vol. 7, No. 4, pp. 192-201.
11. Senouci, A., Al-Abbasi, M., and Eldin, N. (2018). “Impact of weather conditions on construction labor productivity in Qatar”, Middle East J. Management, Vol. 5, No. 1, pp. 34-49.
12. Al-Ansari, M., Abu Taqa, A., Senouci, A., Eldin, N., Helal, M., Asiado, C. (2017). “Proposed Formulas for Estimating Splitting Tensile, Shear and Flexural Strengths, and Long Term Deflection Assessment of Self-Compacting Concrete Elements”, Science of Advanced Materials, Vol. 9, No. 10, pp. 1751–1761.
13. Nikpour, B., Senouci, A., Eldin, N. (2017). “Detection Tool for Unbalanced Bids”, Open Journal of Civil Engineering, Vol. 7, pp. 409-422.
14. Al-Ansari, M., Abutaqa, A., Hassan, M., Senouci, A., Milla, J. (2017). “Performance of Modified Calcium Nitrate Microencapsulation”, Construction and Building Materials Journal, Vol. 149, pp. 525-534, DOI: 10.1016/j.conbuildmat.2017.05.152.
15. Al-Ansari, M, Abutaqa, A., Senouci, A., Popelka, A., Al-Nuaimi, N, Bani-Hani, K. (2017). “Proposed formulas for estimating splitting tensile, shear and flexural strengths, and long term deflection assessment of self-compacting concrete elements”, Science of Advanced Materials, Vol. 9, No. 10, pp. 1751-1761.
16. Abu Taqa, A., Abu Al-Rub, R.; Senouci, A., Popelka, A., Al-Nuaimi, N., Bani-Hani, K. (2016). “Experimental Prediction of the Elastic Properties of Nanocomposite Cementitious Materials Based on Nanoindentation Measurements”, Science of Advanced Materials, Vol. 9, No. 5, pp. 830-846
17. Mohsen, M., Al-Naimi, N., Abu Al-Rub, R., Senouci, A., Bani-Hani, K. (2016). “Effect of mixing duration on flexural strength of multi walled carbon nanotubes cementitious composites”, Construction and Building Materials, Vol. 126, pp. 586–598.
18. Senouci, A., Ismail, A., Eldin, N. (2016). “Time Delay and Cost Overrun in Qatari Public Construction Projects”, Procedia Engineering, Vol. 164, pp. 368-375.
19. Senouci, A., Alsarraj, A., Gunduz, M., Eldin, N. (2016). “Analysis of Change Orders in Qatari Construction Projects”, International Journal of Construction Management, 17(4), 280-292, http://dx.doi.org/10.1080/15623599.2016.1211973.
20. Hassan, M., Kandil, A., Senouci, A., Al-Derham, H. (2016). “Organizational Behavioral Attributes Affecting Likelihood of Adopting Sustainable Construction in Emerging Markets; ASCE, Journal of Construction Engineering and Management, ASCE, Vol. 142, No. 12.
21. Senouci, A., Ismail, A., Eldin, N. (2016). “Time Delay and Cost Overrun in Qatari Public Construction Projects”, Procedia Engineering, Vol. 164, pp. 368-375.
22. Senouci, A., Mubarak, S. (2016). “Multiobjective Optimization Model For Scheduling of Construction Projects under Extreme Weather”, Journal of Civil Engineering and Management, Vol. 22, No. 3, pp. 373-381.
23. El-Abbasy, M., Mosleh, F., Senouci, A., Zayed, T., and Al-Derham, H. (2016). “Locating Leaks in Water Mains Using Noise Loggers,” J. of Infrastructure Systems, ASCE, Vol. 22, No. 3, DOI: 10.1061/(ASCE)IS.1943-555X.0000305.
24. El-Abbasy, M.S., El Chanati, H., Mosleh, F., Senouci, A., Zayed, T., and Al-Derham, H. (2015). “Integrated Performance Assessment Model for Water Distribution Networks”, Journal of Structure and Infrastructure Engineering, Taylor and Francis Group, 12(11), 1505-1524, https://doi.org/10.1080/15732479.2016.1144620.
25. El Chanati, H., El-Abbasy, M.S., Mosleh F., Senouci, A., Abouhamad, M., Gkountis, I., Zayed, T., and Al-Derham, H. (2015). “Multi-Criteria Decision Making Models for Water Pipelines”, ASCE, Journal of Performance of Constructed Facilities, 30(4), http://dx.doi.org/10.1061/(ASCE)CF.1943-5509.0000842.
26. El-Abbasy, M.S., Senouci, A., Zayed, T., and Mosleh, F. (2015). “A Condition Assessment Model for Oil and Gas Pipelines using Integrated Simulation and Analytic Network Process”, Journal of Structure and Infrastructure Engineering, 11(3), 263-281.
27. Parvizsedghy, L., Senouci, A., Zayed, T., Mirahadi, F., and El-Abbasy, M.S. (2015). “Condition-Based Maintenance Decision Support System for Oil and Gas Pipelines”, Journal of Structure and Infrastructure Engineering, Taylor and Francis Group, Structure and Infrastructure Engineering: Maintenance, Management, Life-Cycle Design and Performance, Vol. 11, No. 10, pages 1323-1337.
28. Senouci, A., Al-Abbadi, I., Eldin, N. (2015). “Safety Improvement on Building Construction Sites in Qatar”, Procedia Engineering, 123, 504-509.
29. Bani-Hani, K.A. and Senouci, A. (2015). “Using Waste Tire Crumb Rubber as an Alternative Aggregate for Concrete Pedestrian Blocks”, Jordan Journal of Civil Engineering, 9(3), 400-408.
30. Abu Taqa, A.G., Abu Al-Rub, R. K., Senouci, A., Al-Nuaimi, N., and Bani-Hani, K.A. (2015). “The Effect of Fiber Geometry and Interfacial Properties on the Elastic Properties of Cementitious Nanocomposite Material”, Journal of Nanomaterials, Volume 2015, Article ID 283579, http://dx.doi.org/10.1155/2015/283579.
31. Abu Taqa, A.G., Abu Al-Rub, R. K., Senouci, A., Al-Nuaimi, N., and Bani-Hani, K.A. (2015). “The Effect of Interfacial Transition Zone Properties on the Elastic Properties of Cementitious Nanocomposite Materials”, Journal of Nanomaterials, Volume 2015, Article ID 258384, http://dx.doi.org/10.1155/2015/258384.
32. Senouci, A., Mubarak, S. (2014). “Time-Profit Trade-Off of Construction Projects Under Extreme Weather Conditions”, Journal of Construction Engineering and Project Management, 4(4), 33-40.
33. Abu Al-Rub, R., Kim, S., Bani-Hani, K,, Al-Nuaimi, R., and Senouci, A. (2014) “Finite Element Simulation of Single Carbon Nanotube Pull-outs from a Cementitious Nanocomposite Material using an Elastic-Plastic-Damage and Cohesive Surface Models”, International Journal of Theoretical and Applied Multiscale Mechanics, 3(1), 31 - 57.
34. El-Abbasy, M.S., Senouci, A., Zayed, T., Mirahadi, F., and Parvizsedghy, L. (2014). “Unpiggable Oil And Gas Pipelines Condition Forecasting Models”, Journal of Performance of Constructed Facilities, Vol. 30, No. 1, http://dx.doi.org/10.1061/(ASCE)CF.1943-5509.0000716.
35. El-Abbasy, M.S., Senouci, A., Zayed, T., Mirahadi, F., and Parvizsedghy, L. (2014). “Artificial Neural Network Models for Predicting Condition of Offshore Oil and Gas Pipelines”, Automation in Construction, Vol. 45, pp. 50-65.
36. El-Abbasy, M.S., Senouci, A., Zayed, T., Mirahadi, F., and Parvizsedghy, L. (2014). “Condition Prediction Models for Oil and Gas Pipelines Using Regression Analysis”, ASCE, Journal of Construction Engineering and Management, Vol. 140, No. 6.
37. Senouci, A., El-Abbasy, M.S., and Zayed, T. (2014). “Fuzzy-Based Model for Predicting Failure of Oil Pipelines”, ASCE, Journal of Infrastructure Systems, Vol. 20, No. 4.
38. Senouci, A., El-Abbasy, M.S., Elwakil, E., Abdrabou, B., and Zayed, T. (2014). “A Model for Predicting Failure of Oil Pipelines”, Journal of Structure and Infrastructure Engineering, Taylor and Francis Group, Vol. 10, No. 3, pp. 375-387.
39. Said, H., Kandil, A., Nookala, S., Hubo, El-Gafy, M., Senouci, A., Al-Derham, H. (2013). “Modeling of the Sustainability Goal and Objective Setting Process in the Pre-Design Phase of Building Projects”, American Society of Civil Engineers, Journal of Architectural Engineering, accepted for publication.
40. Attallah, S., Senouci, A., Kandil, A., Al-Derham, H. (2013). “Utilization of Life Cycle Analysis to Evaluate Sustainability Rating Systems for Construction Projects with a Case Study on Qatar Sustainability Assessment System (QSAS)”, Smart and Sustainable Built Environment, Vol. 2, No. 3, pp.272 - 287.
41. Ateeq, M., Senouci, A., Al-Nageim, H., and Al-Shamma’a, A. (2012). “Microwave Spectroscopy for the Analysis of Absorption Properties of Treated Waste Rubber Aggregates”, American Society of Civil Engineers, Journal of Journal of Hazardous, Toxic, and Radioactive Waste, Vol. 16, No.4, pp. 334–342.
42. Al-Ansari, M. S., Senouci, A. (2011). “Drift optimization of high-rise buildings in earthquake zones”, The Structural Design of Tall and Special Buildings, Vol. 20, No. 2, pp. 208-222.
43. Orabi, O., Senouci, A.B., El-Rayes, K., and Al-Derham, H.R. (2010). “Optimizing Resource Utilization during the Recovery of Civil Infrastructure Systems" American Society of Civil Engineers, Journal of Management in Engineering, Volume 26, Issue 4, pp. 237-246
44. Orabi, O., El-Rayes, K., Senouci, A.B., and Al-Derham, H.R. (2009). “Optimizing Post-Disaster Reconstruction Planning for Damaged Transportation Networks”, American Society of Civil Engineers, Journal of Construction Engineering and Management, Vol. 135, No. 10, pp. 1039-1048.
45. Senouci, A. B. and El-Rayes, K. (2009). " Time-Profit Trade-Off Analysis for Construction Projects", American Society of Civil Engineers, Journal of Construction Engineering and Management, Vol. 135, No. 8, pp. 718-725.
46. Senouci, A. B. and Al-Ansari, M. S. (2008). “Cost Optimization of Composite Beams using Genetic Algorithms”, Advances in Engineering Software, Vol. 40, pp. 1112–1118.
47. Senouci, A. B. and Al-Derham, H. R. (2008). "Genetic Algorithm-Based Multi-Objective Model for Scheduling of Linear Construction Projects", Advances in Engineering Software, Vol. 39, No. 12, pp. 1023-1028.
48. Senouci, A. B. and Naji, K. K. (2006). "Computerized System Model for Scheduling and Cost Optimization of Nonserial Linear Projects ", Surveying and Built Environment, Vol. 17, No. 2, pp.49-62.
49. Senouci, A. B. and Eldin, N. N. (2004). "Use of Genetic Algorithms in Resource Scheduling of Construction Projects", American Society of Civil Engineers, Journal of Construction Engineering and Management, Vol. 130, No.6, pp. 869-877.
50. Senouci, A. B. and Naji, K. K. (2003). " Resource-Constrained Scheduling of Construction Projects using Genetic Algorithms", International Journal of Information Technology in Architecture, Engineering and Construction, Vol. 1, No.2., pp. 191-208
51. Al-Ansari, M. S., Senouci, A. (2002). “Structure Mixture Response of Buildings due to Simulated Earthquake Loading”, Engineering Journal of the University of Qatar, Vol. 15, pp. 39-62.
52. Senouci, A. B. and Adeli, H. (2001). “Resource Scheduling Using Neural Dynamics Model of Adeli and Park”, ASCE Journal of Construction Engineering and Management, Vol. 127, No. 1, pp. 28-34.
53. Eldin, N.N. and Senouci, A. B. (2000). “Scheduling of Linear Projects with Single Loop Structures”, Advances in Engineering Software, Vol. 31, No. 10, pp. 803-814.
54. Senouci, A. B. (2000). "Teaching Structural Steel Design Using Mathcad Program", Engineering Journal of Qatar University, Vol. 13, pp. 309-324.
55. Senouci, A. B. (2000). "Preliminary Design Of Reinforced Concrete Beams Using Neural Networks", Engineering Journal of Qatar University, Vol. 13, pp. 107-122.
56. Senouci, A. B. and Al-Bahrawy A. N. (1999). "Optimum Cutting Schedule of Reinforcing Steel Bars ", Engineering Journal of the University of Qatar, Vol. 12, pp. 75-89.
57. Al-Ansari, M.S., Senouci, A.B. (1999). “Use of Mathcad as a teaching and learning tool for reinforced concrete design of footings”, Computer Applications in Engineering Education, Vol. 7, No. 3, pp. 146-154.
58. Al-Ansari, M.S., Senouci, A.B. (1999). “MATHCAD: Teaching and Learning Tool for Reinforced Concrete Design”, International Journal of Engineering Education, Vol. 15, No. 1, pp. 64-71.
59. Senouci, A. B. and M. Ayman Abdul-Salam (1998). "Prediction of Reinforced Concrete Depth Using Neural Networks ", Engineering Journal of Qatar University, Vol. 11, pp. 117-132.
60. Hanna, A. S. and Senouci, A. B. (1997). “Material Cost Minimization of Concrete Wall Forms ", Building and Environment, Vol. 32, No. 1, pp. 57-67.
61. Senouci, A. B. and Al-Ansari, M.S. (1996). “Optimum Design of Concrete Slab Forms”, Engineering Journal of Qatar University, Vol. 9, pp. 79-93.
62. Senouci, A. B. and Eldin, N.N. (1996). “ Dynamic Programming Approach To Linear Scheduling”, ASCE Journal of Computing in Civil Engineering, Vol. 10, No. 2, pp. 106-114.
63. Senouci, A. B. and Eldin, N.N. (1996). “A Time-Cost Trade-off Algorithm for Linear Projects”, Canadian Journal of Civil Engineering, Vol. 23, No.1, pp. 134-149.
64. Hanna, A. S. and Senouci, A.B. (1995). "Design Optimization of Concrete-Slab Forms", ASCE Journal of Construction Engineering and Management, Vol. 121, No. 2, pp. 215-221
65. Eldin, N.N. and Senouci, A.B. (1995). “Condition Rating Prediction of Rigid Pavements by Neural Networks”, Canadian Journal of Civil Engineering, Vol. 22, pp. 861-870.
66. Eldin, N.N. and Senouci, A.B. (1995). “ A Pavement Condition Rating Model using Backpropagation Neural Networks”, Microcomputer in Civil Engineering, Vol. 10, No. 6, pp. 431-441.
67. Eldin, N.N. and Senouci, A.B. (1995). “Use of Neural Networks for Condition Rating of Jointed Concrete Pavements”, Advances in Engineering Software, Vol. 23, pp.133-141.
68. Senouci, A.B. and Eldin, N. N. (1995). “Scheduling of Nonserial Linear Projects with Multiple Non-Overlapped Loop Structures”, Canadian Journal of Civil Engineering, Vol. 22, No. 4, pp. 785-792.
69. Hanna, A. S. and Senouci, A.B. (1995). “Optimum Selection of Horizontal Formwork Systems using Neural Network Technique”, Canadian Journal of Civil Engineering, Vol. 22, No. 4, pp. 785-792.
70. Eldin, N. N. and Senouci, A.B. (1994). “ Scheduling and Control of Linear Projects”, Canadian Journal of Civil Engineering, Vol. 21, pp. 219-230
71. Eldin, N. N. and Senouci, A.B. (1994). “Measurement and Prediction of the Strength of Rubberized Concrete”, Cement and Concrete Composites, Vol. 16, No. 4, pp.287-298.
72. Eldin, N. N. and Senouci, A.B. (1993). “Rubber Tire Particles As Concrete Aggregate”, ASCE Journal of Materials in Civil Engineering, Vol. 5, No. 4, pp. 478-496
73. Eldin, N. N. and Senouci, A.B. (1993). “Observations On Rubberized Concrete Behavior”, Journal of Cement, Concrete, and Aggregate, American Society of Testing Materials, Vol. 15, No.1, pp. 74-84
74. Peyrot, A.H., Peyrot, E.M., and Senouci, A. (1993). “Optimization methods for transmission line design”, Engineering Structures, Vol. 15, No.4, pp. 229-237
75. Eldin, N. N. and Senouci, A.B. (1992). “Engineering Properties of Rubberized Concrete”, Canadian Journal of Civil Engineering, Vol. 19, pp. 912-923
76. Eldin, N. N. and Senouci, A.B. (1992). “ Use of Scrap Tires in Road Construction”, ASCE Journal of Construction Engineering and Management, Vol. 120, No. 3, pp. 561-575
Refereed Conference Papers:
77. Garimella, S., Senouci, A., and Kim, K. (2020). “Monitoring Fatigue in Construction Workers Using Wearable Sensors.” ASCE CRC 2020, Tempe, Arizona, March 8th – March 10th, 2020.
78. Senouci, A., Bowlekar, N., Khalafi, S.A., Eldin, N. N. (2019). “A Multi Objective Scheduling Model for Minimization of Construction Project Duration, Total Cost and Environmental Impact”, 2019 Creative Construction Conference, Budapest, Hungary, June 29th-July 2nd, 2019.
79. Senouci, A., Sekar, S., Khalafi, S.A., and Eldin, N.N. (2019). “Current Supply Chain Management in Construction Industry”, 2019 Creative Construction Conference, Budapest, Hungary, June 29th - July 2nd, 2019.
80. Senouci, A., Al-Abbasi, M., and Eldin, N. (2017). “Impact of weather conditions on construction labor productivity in Qatar”, 9th International Conference on Construction in the 21st Century (CITC-9), Dubai, United Arab Emirates, March 5th-7th, 2017.
81. Senouci, A., Ismail, A., Eldin, N. (2016). “Time and Cost Overrun in Public Construction Projects in Qatar”, 2016 Creative Construction Conference, Sopron, Hungary, June 24-28, 2016.
82. Senouci, A., Ismail, A., Eldin, N. (2016). “Time and Cost Overrun in Public Construction Projects in Qatar”, 2016 Creative Construction Conference, Sopron, Hungary, June 24-28, 2016.
83. Leon, R.M., Senouci, A., Eldin, N. (2016). “EVM Schedule Performance Index Schedule Index (SPI) Effectiveness in Assessing Project Schedule Performance”, 2016 Canadian Society of Civil Engineers (CSCE) Annual Conference, London, Ontario, Canada, June 1-6, 2016.
84. El-Abbasy, M.S., Mosleh, F., Senouci, A., Zayed, T., and Al-Derham, H. (2015). “Towards Locating Leaks in Water Mains using Noise Loggers”, Civil and Construction Engr. and Technologies Conference, CONSTENG 15, Vol. 2015, Istanbul, Turkey, December 3-5.
85. El-Abbasy, M.S., Zayed, T., and Senouci, A. (2015). “Innovative Asset Management Tools for Sustainable Oil and Gas Pipelines”, The Fourth International Conference on Soft Computing Technology in Civil, Structural, and Environmental Engineering, Prague, Czech Republic, September 1–4, 2015.
86. Al-Abbadi, I., Senouci, A., and Eldin, N. (2015). “Safety Improvement on Building Construction Sites in Qatar”, Creative Construction Conference, Krakow, Poland, June 21-24, 2015.
87. Senouci, A.B., Abdel Warith, K.A., and Eldin, N.N. (2015). “Agent Based Model for Resource Constrained Scheduling of Construction Projects”, 2015 International Workshop on Computing in Civil Engineering, Austin, Texas, June 21–23, 2015.
88. Attallah, S., Kandil, A., Senouci, A., Al-Derham, H., and Abdelwarith, K. (2015). “Comparative Evaluation of LEED and QSAS Credits Using Life Cycle Analysis: Case Study from Qatar”, 11th Construction Specialty Conference, Montreal, Canada, June 8-10 1, 2015.
89. Senouci, A.B., Abu Taqa, A.G., Eldin, N.N., Al-Ansari, M.S. (2015). “Structural Behavior of Self-Compacting Concrete Elements”, 51st ASC Annual International Conference Proceedings, Associated Schools of Construction, College Station, Texas, April 22-25, 2015.
90. El-Abbasy, M.S., Senouci, A., Zayed, T., and Al-Derham, H. (2014). “Assessing Water Pipelines Performance Using Acyclic Simulation”, 14th International Conference on Construction Applications of Virtual Reality in Construction and Conference on Islamic Architecture, Vol. 2014, Sharjah, UAE, November 16 – 18.
91. Attallah, S., Kandil, A., Senouci, A., and Al-Derham, H., Elwakil, E. (2013). “Modeling Impact of Sustainability Policies in Qatar using Agent Based Approach and Life Cycle Analysis”, 2014 Conference on Computing in Civil and Building Engineering, Orlando, Florida, June 23-25, 2014.
92. Abu Taqa, A., Senouci, A., Al-Ansari, M., Al-Farsi, A., Alkhatib, A., Nasir, A., Eltaweel, F., Rahman, M., Salem, M. (2014). “Structural Behavior of Reinforced Concrete Elements Made of Self-Compacting Concrete”, IMS/7 International Conference on Advances in Engineering Materials, American University of Sharjah, United Arab Emirates, March 18-20.
93. El-Abbasy, M.S., Senouci, A., and Zayed, T. (2014). “Risk Assessment of Oil and Gas Pipelines”, Offshore Arabia Conference and Exhibition, Vol. 2014, Dubai, UAE, March 3–5, 2014.
94. El-Abbasy, M.S., Senouci, A., and Zayed, T. (2014). “Unpiggable Oil and Gas Pipelines Condition Forecasting Model”, 7th International Petroleum Technology Conference, IPTC, Vol. 2014, Doha, Qatar, January 20–22, 2014.
95. El-Abbasy, M.S., Senouci, A., and Zayed, T. (2013). “Predicting Offshore Oil and Gas Pipelines Condition”, Qatar Foundation Annual Research Forum Proceedings, QFARF, Vol. 2013, Doha, Qatar, November 24–25, 2013.
96. Hassan, M., Kandil, A., Senouci, A., and Al-Derham, H. (2013). “Measuring Construction Materials Price Fluctuation Risk”, 4th Construction Specialty Conference, Montreal, Canada, May 29-June 1, 2013.
97. Attallah, S., Kandil, A., Senouci, A., and Al-Derham, H. (2013). “Developing a Framework for Calculating LCA Normalization Factors for the State of Qatar”, 4th Construction Specialty Conference, Montreal, Canada, May 29-June 1, 2013.
98. Senouci, A. and Mubarak, S. (2013). “Time-Profit Trade-Off of Construction Projects in Extreme Hot Weather Regions”, Construction CPM Conference, New Orleans, Louisiana, USA, January 28 – Feb 1, 2013.
99. Senouci, A. and Mubarak, S. (2012). “Genetic Algorithm-based Multi-Objective Model for Scheduling of Linear Construction Projects Under Extreme Weather Conditions”, The First Australasia and South-East Asia Structural Engineering and Construction Conference, Perth, Australia, November 28-Dec 2, 2012.
100. Senouci, A. and Mubarak, S. (2012). “Profit Optimization for Construction Projects under Extreme Hot Weather Conditions”, 2012 International Total Cost Management Conference, Dubai, UAE, November 14-15, 2012.
101. El-Abbasy, M.S., Senouci, A., and Zayed, T. (2012). “Unpiggable Oil and Gas Pipelines Condition Forecasting Model”, Qatar Foundation Annual Research Forum Proceedings, QFARF, Vol. 2012, Doha, Qatar, October 21 – 23, 2012.
102. Hassan, M., Kandil, A., Senouci, A., Al-Derham, H., Cai, H., and El-Gafy, M. (2012). “A Framework for Modeling the Adoption Process of Construction Sustainability Policies: An Agent-Based Simulation Approach” Proceedings of the CIB W78 2012, 29th International Conference, Beirut, Lebanon, 17-19 October, 2012.
103. Attallah, S., Kandil, A., Senouci, A., Al-Derham, H., Cai, H., and El-Gafy, M. (2012). “An Agent Based Modeling and Life Cycle Analysis Based Approach for Enhancing Construction Sustainability in Qatar” Proceedings of the CIB W78 2012, 29th International Conference, Beirut, Lebanon, 17-19 October, 2012.
104. Abdelwarith, K., Kandil, A., Haddock, J., Senouci, A., and Al-Derham, H. (2012). “Review of Existing Transportation Sustainability Initiatives and Their Applicability to Qatar”, Construction Research Congress, West Lafayette, Indiana, May 21-23, 2012.
105. Nookala, S., Said, H., Kandil, A., Hubo, C., Al-Derham, H, Senouci, A., and El-Gafy, M. 2012. “Developing a Framework for Pre-Design Process Simulation for Green Buildings”, Construction Research Congress, West Lafayette, Indiana, May 21-23.
106. Ateeq, M., Senouci, A., Al-Ansari, M., Al-Shamma’a, A., Al-Nageim, H. (2012), “Optimum percentage of waste rubber aggregates for cost efficient chemical treatment” Built Environment and Natural Environment Conference, Peter Jost Enterprise Centre, School of Built Environment, Liverpool John Moores University, Liverpool, UK, May 30.
107. Long, G., Shakir, A., Al Ansari, M., Senouci, A., Al Nageim, H., Al-Shamma’a, A. (2012), “Indirect Tensile Modulus and Deformation of Upgraded Rubberized Bituminous Material”, Built Environment and Natural Environment Conference, Peter Jost Enterprise Centre, School of Built Environment, Liverpool John Moores University, Liverpool, UK, May 30.
108. Ateeq, M., Senouci, A.B., Al-Ansari, M.S., Al-Shamma’a, A., Al-Nageim, H. (2012), “Mechanical performance of rubberized bituminous mix design” Proceeding of the 11th Annual International Conference on Pavement Engineering and Infrastructure, Britannia Adelphi Hotel, Liverpool, UK, February 15-16.
109. Senouci, A., Bani-Hani, K., AlDous, K., Ehsan, B., AbuHassan, M., AlQassass, M. (2011). “Using waste tire crumb rubber as an alternative aggregate for concrete pedestrian blocks”, The Sixth International Structural Engineering and Construction Conference, Zurich, June 21-26.
110. Ateeq, M., Senouci, A., Al-Nageim, H., Al-Shamma’a, A. (2011), “A new approach to enhance the properties of waste polymer” Built Environment and Natural Environment (BEAN) Conference, BEST Research Institute, 2011, Peter Jost Enterprise Centre, Liverpool John Moores University, Liverpool, UK, May 10.
111. Ateeq, M., Senouci, A.B., Al-Shamma’a, A., Al-Nageim, H. (2010). “Study and analysis of the properties of upgraded coarse waste rubber aggregates”, LCMT 9th International Conference on Sustainable Construction Materials and Technology in Asphalt, Pavement Engineering, and Highway Maintenance, Liverpool, UK, February 17-18.
112. Long, G., Senouci, A.B., Al-Nageim, H., and Al-Shamma’a, A. (2010). Upgrading rubberized bituminous material for use in school playground pavement, 9th International Conference
Sustainable Construction Materials and Technology in Asphalt, Pavement Engineering and Highways Maintenance, Liverpool, UK, February 17-18, 2010 113. Senouci, A. and Al-Nuaimi, N. (2009). “Genetic Algorithm-Based Multi-Objective Design Model for Reinforced Concrete Beams”, 5th International Structural Engineering & Construction (ISEC-5) Conference, Las Vegas, Nevada, September 21-27, 2009.
114. Al Nageim, H. and Senouci, A.B. (2009), “Waste Rubber Aggregates for Use in Asphalts: A Laboratory Study”, Fifth International Conference in the 21st Century (CITC-V), Istanbul, Turkey, May 20-22, 2009.
115. Orabi, W., El-Rayes, K., Senouci, A.B., and Al-Derham, H. R. (2009). “Planning Post-Disaster Reconstruction Efforts of Damaged Transportation Networks” submitted for publication in the Proceedings of the 2009 Construction Research Congress, ASCE, Seattle, Washington, April 4-7, 2009.
116. Ateeq, M., Long, G., Senouci, A.B., Al-Nageim, H., Al-Shamma’a, A. (2009), “Upgrading coarse and fine waste tire rubber aggregate material using LJMU technology, chemical additives, and EM waves” 8th LCMT Annual International Conference; Sustainable Aggregates, Pavement Engineering, and Asphalt Technology, Design Construction, Management, Performance and Rehabilitations, Liverpool, UK, February 18-19, 2009.
117. Senouci, A. B. and Al Nuaimi, N. A. 2008. “Cost Optimization of Composite Beams Using Genetic Algorithms”, 5th International Conference on Innovation in Architecture, Engineering and Construction, Antalya, Turkey, June 23-25, 2008.
118. Senouci, A. B. and Al-Derham, H. R. (2007). "Duration-Profit Trade-off Analysis of Construction Projects", 4th International Conference on Construction in the 21st Century (CITC-IV), “Accelerating Innovation in Engineering, Management”, Gold Coast, Australia, July 11-13, 2007.
119. Senouci, A. B. and Al-Derham, H. R. (2006). "Genetic Algorithm-Based Multi-Objective Model for Scheduling of Linear Construction Projects", 5th International Conference on Engineering Computational Technology, Las Palmas de Gran Canaria, Spain, September 12-15, 2006.
120. Senouci, A. B. and Eldin, N. N. (2005). "Genetic Algorithm Model for Scheduling and Cost optimization of Nonserial Linear Projects", 3th International Structural Engineering and Construction (ISEC-03), Tokuyama College of Technology, Shunan, Japan, September 20-23, 2005.
121. Senouci, A. B. and Naji, K. K. (2003). "Resource Scheduling of Construction Projects using a Hybrid Genetic Algorithm Model ", 2nd International Structural Engineering and Construction (ISEC-02), Rome, September 23-26.
122. Senouci, A. B. (2001). “Use of Mathcad as Teaching and Learning Tool for Project Scheduling”, The First International Structural Engineering and Construction Conference, University of Hawaii at Manoa, Honolulu, Hawaii, 24-27 January 2001.
123. Bohnhoff, D. R., Senouci, A. B., Moody, R. C., and Boor, P. A. (1993). “Bending Properties of STP-Laminated Posts”, International Summer Meeting sponsored by the American Society of Agricultural Engineering and the Canadian Society of Agricultural Engineering, Spokane Center, Spokane, Washington, USA.
124. Hanna, A. S. and Senouci, A. B. (1993). “Neural Network Development for Selection of Horizontal Formwork Systems”, American Concrete Institute Convention in Minneapolis, Minnesota, USA, November 7-12, 1993.
Technical Reports
125. Senouci, A., Dedha, A., Resource Constrained Optimized Scheduling of Hydrotesting Activities, PCL Industrial Construction Company, 2020, 11 pp. ($36,512 project budget)
126. Senouci, A., Kim, K., Doddapaneni, N., Talari, A., Dedha, A.,Modular Construction Simulation and Optimization. Fluor Enterprises Inc., 2019, 37 pp. ($50,942 project budget)
127. Al-Ansari, M., Dawood, M., Belarbi, A., Senouci, A., Gencturk, B., Rehabilitation of Deteriorated Concrete infrastructure in Qatar using Shape Memory Alloys for Active Confinement. Qatar National Research Fund, 2018, 103 pp. ($ 272,000 project budget)
128. El-Abbasy, M., Moselh, F., Zayed, T., Senouci, A., Al-Derham, H. Technology-Based Asset Management Tools for Sustainable Water Infrastructure in Qatar. Qatar National Research Fund, Doha, Qatar, 2015, 270 pp. ($669,043 project budget)
129. Sabbagh, I., Yasin, M., AlChamaa, I., Nasr, A., Samama, A., Kowita, O. Impact of Change Orders on the Construction Industry in Qatar. Qatar National Research Fund (QNRF), Doha, Qatar, 2015 ($44,400 project budget)
130. El-Abbassy, M., Parvizsedghy, L., Zayed, T, Senouci, A. Innovative Asset Management Tools for Sustainable Oil and Gas Pipelines. Qatar National Research Fund, Doha, Qatar, 2014, 260 pp. ($644,256 project budget)
131. Hassan, M., Attallah, S., Kandil, A., Senouci, A., Al-Derham, H., Cai, H., El-Gafy, M. Impact of Environmental Policies on the Construction Industry in Qatar. Qatar National Research Fund, Doha, Qatar, 2014, 274 pp. ($712,936 project budget)
132. Al-Tweel, F., Salem, M., Al-Farsi, A., Alkhatib, A., Rahman, M., Nasr, A., Abu Taqa, A., Senouci, A., Al-Ansari, M. Structural Behavior of Self-Compacting Concrete Elements. Qatar National Research Fund (QNRF), Doha, Qatar, 2014 ($53,400 project budget).
133. Senouci, A., Al-Nageim, H., Al-Ansari, M., and Al-Shammaa, A. Upgrading Waste Rubber-Tire Aggregates for Use in School Playgrounds and Tennis Courts, Qatar National Research Fund, Doha, Qatar, 2011. ($601,000 project budget)
134. Dohair, I., Shehadeh, A., Alfar, M., Anayeh, M., Shehada, M., Abu Hassan, M. Bani-Hani, K., Senouci, A., Al-Nuaimi, N. Wireless sensors for corrosion detection of post-tension tendons in bridges. Qatar National Research Fund, Doha, Qatar, 2010. ($59,400 project budget)
135. Shuaib, A., Ibrahim, M., Ghalib, F., Hosni, A., Ghani, S., Senouci, A., Jodeh, S. Numerical and experimental investigation into fresh concrete rheology. Qatar National Research Fund (QNRF), Doha, Qatar, 2010. ($39,498 project budget)
136. Ahsan, B., Abu Hassan, M., Al Qassass, M., Al Dous, K., Senouci, A., Bani-Hani, K. Using waste tire rubber as alternative aggregate for concrete blocks and bricks. Qatar National Research Fund, Doha, Qatar, 2010. ($30,500 project budget)
137. Madhoun, M., Aoda, A., Sadeq, H., Abu-Hijla, A., Senouci, A., Al-Ansari, M. Performance of Reinforced Concrete with Treated Municipal Mixing Water. Qatar University Research Office, Doha, Qatar, 2009 ($20,000 project budget)

Educations

1991

University of Wisconsin-Madison
Ph. D. Degree in Civil Engineering

(Advisor: Prof. Alain H. Peyrot)

 

Madison, Wisconsin

1991

University of Wisconsin-Madison
M.S. Degree in Construction Management

(Advisor: Prof. Neil N. Eldin)

 

Madison, Wisconsin

1987

University of Wisconsin-Madison
M. S. Degree in Civil Engineering

(Advisor: Prof. Alain H. Peyrot)

 

Madison, Wisconsin

1984

National Polytechnic School of Algiers
B. S. Degree in Civil Engineering

 

Algiers, Algeria
Rank: First

Honors & Awards

• Best Peer Reviewed Paper Award, Journal of Construction Engineering and Management, ASCE. 2009.

Editorship

2019-2021: Editorial Review Board Member for Journal of Civil, Construction, and Environmental Engineering
2019-2020: Editorial Review Board Member for Construction Research Journal
2018-Now: Editorial Review Board Member for Journal of Civil Engineering and Construction
2015-Now: Editorial Board Member, Journal of Civil Engineering and Architecture Research
2012-Now: Editorial Board Member, International Journal of Forensic Engineering and Management
2012-Now: Editorial Board Member, Journal of Civil Engineering Research
2012-Now: Editorial Board Member, ISRN Civil Engineering
2019-Now: Reviewer for American Journal of Civil Engineering
2019-Now: Reviewer for ASCE Construction Research Congress (CRC) Conference
2019-Now: Reviewer for International Conference on Civil Infrastructure and Construction, Doha, Qatar
2019-Now: Reviewer for Transactions on Engineering Management
2019-Now: Review for Journal of Computing in Civil Engineering. (2019 - Present)
2018-Now: Reviewer for Tran-SET Conference
2016-Now: Reviewer for Journal of Construction and Building Materials
2016-Now: Reviewer for Journal of Engineering Structures
2016-Now: Reviewer for Journal of Neural Computing and Applications
2015-Now: Reviewer for ASC (Associated Schools of Construction) Proceedings.
2010-Now: Reviewer for Journal of Construction Engineering and Management (ASCE)
2010-Now: Reviewer for Journal of Automation in Construction
2010-Now: Reviewer for Computer-Aided Civil and Infrastructure Engineering
2004: Member of the International Technical Committee for the Fourth International Structural Engineering and Construction (ISEC-04), Australia.
2003: Member of the International Technical Committee for the Third International Structural Engineering and Construction (ISEC-03), Japan.
2000-Now: Reviewer for the American Concrete Institute (ACI) – Materials Journal
1998-2014: Expert witness for the civil courts of Qatar, Doha, Qatar
1998-Now: Reviewer for the Computer-Aided Civil and Infrastructure Engineering Journal